Universal uPVC Door Lock Repair Kit - 4 Roller
ThIs universal repair lock is designed to replace uPVC door locks with a 35mm backset. The repair lock comes in one piece with 4 rollers and a central hook and is complemented with a one piece non-handed keep. The one piece keep makes it easy to align to the universal door lock and also covers up any holes left by the previously installed door lock. This makes this universal door lock very quick and easy to install even for the novice DIYer
Information
- 35mm Backset
- 92PZ
- Designed to make installation as simple as possible for both the professional and DIY user.
- Replaces uPVC door locks with a backset of 35mm
- 4 Rollers
- One piece non-handed keep
- Includes multi-fit keep packers
- Easily reversible latch
- Non-handed so will suit left and right handed doors
- Corrosion resistant: BS EN 1670 Grade 4 (240 hours)
In The Box
- 1 x Universal Repair Lock 35mm Backset - 4 Rollers
- 1 x Universal non-handed keep
- 1 x Installation instructions
Will it fit my door?
- This universal door lock has been designed to fit most uPVC doors, but to be sure it will fit your door you just need to look at 3 simple measurements.
- Measure the backset: Measure the distance between the centre of the cylinder and the metal faceplate of the lock (not the edge of the door) - this needs to 35mm.
- Measure the PZ centres: Measure the distance between the centre of the cylinder and the centre of the door handle - this needs to be 92mm.
- Measure the faceplate: Measure the width of the metal faceplate on your existing lock this must be 16mm.
