Description
Universal uPVC Door Lock Repair Kit
The top and bottom hook sections can be cropped to size allowing you to fit the hook gearboxes into the existing routed out holes on your door.
Information
- 35mm Backset
- 92PZ
- Designed to make installation as simple as possible for both the professional and DIY user.
- Replaces uPVC door locks with a backset of 35mm
- 3 piece lock and three piece keep
- 3 steel hooks & two tidy plates
- Top and bottom hook centres independently adjustable
- Easily reversible latch with snib
- Non-handed so will suit left and right handed doors
- Single spindle and split spindle functionality
- Corrosion resistant: BS EN 1670 Grade 4 (240 hours)
- Secured by Design Approved
- 10 year manufacturers guarantee
In The Box
- 1 x Universal Repair Lock 35mm Backset (3 Parts)
- 2 x Hook bolt keeps
- 1 x Centre latch and keep
- 2 x Tidy plates
- 1 x Screw Pack
Will it fit my door?
This universal door lock has been designed to fit most uPVC doors, but to be sure it will fit your door you just need to look at 3 simple measurements.- Measure the backset: Measure the distance between the centre of the cylinder and the metal faceplate of the lock (not the edge of the door) - this needs to 35mm.
- Measure the PZ centres: Measure the distance between the centre of the cylinder and the centre of the door handle - this needs to be 92mm.
- Measure the faceplate: Measure the width of the metal faceplate on your existing lock this must be 16mm.
